Product Name
Fret mill, Wet pan, Edge runner
- Product Summery
- It consists of a set of two to four heavy-duty rollers and a pan (disk-shaped table), and the raw materials placed on the pan are crushed by the weight of the rollers.
- Contact
-
Click here for inquiries about this product ▼
Product type
- Fret mill, Wet pan, Edge runner
Fret mill, Wet pan, Edge runner
This machine is constructed in two parts, the outer rotating cylinder or pan andthe inclosed twin rotating heavy rollers.
The rollers are supported by a rigid arm that produces the downward compression force.
The rotation of the pan causes the rollers to rotate at a different speed and this results in the pulverisation
and mixing of the materials to be crushed.
The pan also has scrapers that direct the material into the path of the rollers during processing and also discharge the material effectively once the scuppers are opened.
Major features
Fret mill, Wet pan, Edge runner
Since it also has a mixing action when it grinds, it is sometimes used for mixing and kneading.
The scraper scrapes up the ground raw material to create a flow, and the finely ground raw material is discharged as the product.
Even if excess metal is mixed in with the ground raw material, if the diameter is small, it will be crushed by the compression effect. If the diameter is large, the rollers will escape, so the equipment will not be damaged.
It can be used even under the most extreme conditions, and is widely used.
Photographs
Fret mill, Wet pan, Edge runner
Wet pan
Wet pan (when assembled)
Wet pan grinding roller
Fret mill (assembled in-house)
Fret mill (disassembled before shipping)
Fret mill (after installation)